Arduino 009

Plexiglass Arduino Case

Use 2 mm thick plexiglass for top and bottom of the cover, and 4 mm thick for layers between them (it’s a single file that needs to be cut 4 times). For CNC cutting of plexiglass use 1.8 mm drill. Arduino board needs to be attached to the bottom layer of the case with two M3x10 screws and nuts. Four M3x25 screws and nuts are needed to assemble the entire box. Design by Paula Szarejko. More about this project: http://blog.zmorph3d.com/customized-arduino-cases/

Designed by Marcin Traczyk on October 26, 2016

Design's files:

No one has added any comments for this design so far.