Arduino 002

Wooden Arduino Case

Make this stylish Arduino case entirely from sheets of 2 mm (top, bottom, and two middle layers) and 6 mm plywood (2 middle layers). There are two 2 mm and two 6 mm middle layers joined together, but you could also print only two of them using 8 mm plywood. For CNC cutting of plywood parts use a 1.8 mm drill. Arduino board needs to be screwed to the 2 mm bottom plywood part - you’ll need two M3x25 screws and nuts. Four additional M3x25 screws and nuts are needed to hold the entire case together. Design by Paula Szarejko. More about this project:

Designed by Marcin Traczyk on October 26, 2016

Design's files:

No one has added any comments for this design so far.