Print with PLA. 0.2mm There is one part with cat - it's symmetric so you can choose sides. You'll need: 2x 50mmx70mm mirror (standard in "compact mirrors") 2x 3x1 neodymium magnet (or other) Screw in hinge: just push inside 1.75mm filament (the same which was used to print box) and glue it on one side (or melt on both). Cat in second part is just a hole. I fill it by 3d pen with black PLA. If you have twin toolhead you can use it there.
Designed by kpawel on June 20, 2016